I’ve gotten so used to being busy that now that the rain has forced me inside I’m feeling a little cabin fever. Luckily, there are tasks still available. I pulled the door today out of the designated “warm” room where it’s been curing, to see if it needs more putty. I took sandpaper and steel wool to it and found a few small places that need more putty (around one of the wood plugs and in a couple small dents). The layers of putty are thin enough so that even outside of the warm room it was dry within a couple hours. It’s looking good!
While waiting for the putty to dry, I pried off the old pet door surround at the bottom of the door. It was de-laminated and starting to rot so had to go. Now, I actually want an opening in the door, for running a water hose through to fill the tank just inside. Once again, poking through my store of materials for the original Oliver’s Nest turned up a solution in the form of a brand-new (found at a local thrift store) pet door I forgot I’d purchased. All that I have to do is enlarge the hold a little, and screw the new pet door on!
It’s just bleh plastic, but still nicer than what was there originally.
I called my mechanic and bad news. The tank will need to be dropped, drained, cleaned and (oh no!) possibly even replaced! Depending on if it’s rusted out. Apparently the fact that the “water in fuel line” indicator light comes on means there is a LOT of water in the tank, way too much for an additive to take care of. He also recommended I take the Beast to a dedicated diesel shop for this. Luckily there is one only a mile up the road from me so that’s handled. I can easily walk home and then back when the truck’s ready to pick up. Yay! Now if only I find $400 laying on the side of the road to pay for this. But, that’s what credit cards are for, right?
I think I’m going to take the evening off from fretting about this and play a video game instead.