More Progress!

The rain is back. Not that it was completely gone, but I could do lots of things between the semi-hourly showers.  Now I’m at a point where I need several days (and nights) in a row that are completely dry, and Weatherbug is telling me that’s just not going to happen for at least ten days.  Sigh.
Good news though!  The Beast (my truck) is running well, as long as I only use fuel from the front tank.  I believe the diesel in the back tank has water in it.  I’m going to call my mechanic and see what his estimate for dealing with that is.  I HOPE it’s not much!  I’m going to call tomorrow if I feel brave enough.
Here’s a list of what has gotten done since my last post:
-walled in the area behind the truck cab/under the loft
-installed the rest of the metal roofing
-installed cedar drip edging all around the roof, except for the front slanting portion where the front windows will go
-rebuilt the door casing (it was easy!)
-puttied the old doorknob holes in the door
-cut the hinge grooves with a chisel and hammer (not nearly as difficult as you’d think but a bit time-consuming)
-continued puttying the windows ~ it will be at least another week to get it all done
I’ve thought a lot about what to use for trim on the vertical edges.  Cedar?  Cut strips of the metal siding down and fold into an “L” shape?  Use metal flashing of some sort?   When it started raining this afternoon, I went rooting through my piles of building materials and found a bunch of old metal flashing that was given to me a few years ago.  It came from an old barn, and other than the screw holes and some more of that black gook that was on the metal roofing panels (they were from the same barn), is in great shape.  It’s straight and long and wide ~ perfect for glueing and screwing to the edges.  There’s enough to put on every vertical and semi-vertical edge on the whole structure!
I’ll spend the next week or so while it’s wet out to get the black substance off the flashing.  I also plan on sanding down the door and casing and getting them both painted.  Once they are ready, I can install the door!  I found a product that will make hanging the door easier:  The Quick Door Hanger kit.  It only costs $5, and makes it much easier to ensure the casing is straight so the door works properly.  I could use shims, but honestly, after so much effort with the door, I want a little ease.  Plus, I really want a usable door that opens easily and doesn’t stick or swing shut on it’s own.  🙂
My mood has been good.  I have lots of energy.  All I need is enough time.  Crossing fingers and toes and everything!

Insulation And Roofing

Besides feverishly rewatching Heroes, I’ve gotten back into working on Oliver’s Nest with a vengeance.  The last three days I got all the wool insulation into the walls (minus the missing wall behind the truck cab). It was dusty and my eyes aren’t happy, but it’s all in.  Although easy to work with, by using the provided netting, I still recommend having another pair of hands to move things along faster.  It took me about 8 to 10 hours total, and with help, I think it would take less than half that.  Here’s some pictures showing the progress (wordpress wants them in this order, no matter what I try):

I had to cut and frame the back fuel intake door before putting in the insulation, so that’s another task off the list.

PicShop-D06CE55D3B913AAFAF8573991016B0DF

Back fuel intake door finally cut and framed.

It’s been mostly sunny so I tackled the roof, too.  I laid on plastic, flashed the skylight over that, and then placed the metal roofing panels.  As I still need to insert flashing around the sides, I didn’t screw the panels down.  I’ll be putting in the flashing tomorrow.  The rest of the roof will be harder to cover as I’ll need to cut down the panels.  I envision lots of cuts in my hands come then!  Here’s what I did with the roof today:

Finally, I cut down the door, which was super easy and didn’t take much time at all.  The doorknob holes that were partially cut away obviously needed to be filled so I cut round plugs from the cut-off sections and puttied them in.  I’m sure it will take a few days for them to dry, and will take a few layers to fill completely.  I think this was a good solution to the problem, even though a little messy  .I’m afraid I won’t be able to make it into a dutch door now, as the only place large enough for the new doorknob is where the split would have been.  I’m disappointed but happy I didn’t ruin the door when I cut it, so it’s all right. 🙂

I have a strong feeling of time running out.  All I can do is take the anxiety meds I’m supposed to, and work, and try to think as positively as possible.  And, do my best not to think of all the months wasted by being depressed and hiding in bed.  I’ve said it before and I’m saying it again: Major Depressive Disorder sucks!  At least I’m okay for now, which is all one can hope for.  I’m even happy…I’m enjoying being busy and working on my project again!

Do yourself a favor and try something scary/exciting sometime.  It’s a great feeling and I think it’s good for the soul. 🙂

Progress

I totally support reusing materials, I want to start with that.  But, it’s a LOT more work!


After hours of scraping and sanding and puttying, the old wood windows are now set aside while I wait for the putty to dry.  Seriously, hours.  I think they look pretty good now, and by the fourth window I felt like a glazing master. 🙂  Once the glazing putty is dry, which takes up to two weeks, I’ll fill in the spaces left by the old opening mechanisms with wood putty.  After that is dry, I’ll finally be able to paint and see what I’ve got.  I’m feeling really good about getting back to work.  Too much laying around with the boys, watching Netflix this winter!

PicShop-2B3375333FA36D7D39ECAB10CCE2C7AD

Proton and big Leo hanging out watching Netflix with me

Once the windows were out of the way, I took another look at the metal roofing panels.  I had tried using paint remover to take off the black chunks of old roofing tar/adhesive, which failed.  I never washed that off, and it actually did make it easier to chip off all the gook.  It only took a few days, and some scrapes and cuts (I’ll never learn to wear gloves), and the panels are now ready to be used.  Another task checked off!

PicShop-A5281FFE401728CE9B932366EF859170

Shiny and clean

Currently, I’m working on the door, which is going to take a lot of work.  Taking off the old paint and sanding isn’t really what’s going to be difficult, it’s cutting the door down to size that I’m not looking forward to.  So dusty, and I’m working indoors due to how wet it is outside…oh the mess that will be made…. I’m definitely wishing I’d just made the door opening larger.  I didn’t because I wanted more wall space inside.  Sigh.  Once this is done, I’ll be happy with the decision, probably, but for now I’m kicking myself.
So, everyone?  Wish for warmer, drier weather for me?  Thanks!